A fish finder is one of the greatest tools a fisherman can invest in. Not only does it help you locate the biggest and best groups of fish out on a lake or ocean, but it can help you avoid potentially dangerous obstacles.You worried about How To Use Fish Finder ?
If you’re looking up this article, you may know the basics of fish finders already, but this information will take you to the next level.By fine-tuning both your fish-finding abilities, and your ability to use a fish finder, your fishing game will increase drastically.
In this article, we will cover four specific areas of How To Use Fish Finder that will help your progress:
After you learn to properly utilize the zoom feature of your fish finder, you can get a better understanding of the areas you are fishing in.
You need to understand that the way lines pop up on the screen can be counter-intuitive. For example, a hard bottom will show up as a thin bottom line, while soft bottoms present a thick bottom line.
This happens because sonar waves penetrate soft bottoms to some degree before bouncing back and giving information to the fish finder.
Ultimately, to understand whether the bottom of the area you are fishing over is hard or soft, you need to zoom in far enough to see the last five or ten feet of water being picked up by your fish finder.
Most fish finders come with a transom-mount transducer. This useful feature can get you better results, but only if you know how to calibrate it properly. To get good feedback, try adjusting the settings, or changing your location entirely.For fine mount you must be need to know How To Use Fish Finder
When you are receiving poor details and info from your fish finder, these settings are often why. By adjusting them, you unlock a much better ability to use your location features.
Turbulence can also interfere with the readings you’re getting from the fish finder. When you are having interference from turbulence, changing settings in the transom-mount reducer is a perfect solution.
Any quality fish finder on the market today has highly sensitive tuning capabilities. While this will benefit you greatly in still waters, you might find that it seems like a detriment in rougher areas.
If you don’t know how to adjust your settings to do well in rougher water‘s, or those with thick plank-tonic or algae growth, you will be lost at sea.
When you find yourself in this situation, simply peak the transducer slowly work your way down from the maximum setting. Eventually, you will get to a perfect area of sensitivity.
Another important tip for tuning is that it’s always ill-advised to boost filters when trying to reduce surface clutter. All this will do is decrease the amount of sensitivity your tuner is experiencing.
Filters may give you a better view of surface features, but it will do little to give you a clear view of the area below the surface that really matters.
Understanding the Interface
Fish finders should always be used in conjunction with your chart-plotter. This will help you understand the various visual signifies that show up on your fish finder.
If you have a combo unit, using the split-screen feature so you can see both the fish finding and chart-plotter data is highly recommended. Those who failed to invest in a combo system, should try to invest in one if at all possible.
You will be able to easily scroll between important information, and you can easily reroute to any area that promises a better chance of catching big amounts of fish.
With these amazing tips, you will get a lot more use out of your fish finder. Once you begin having a more finessed approach to your fishing excursions, you will never go back to fishing blind again.